The Hobby eStore

ACME Warrior - Fully Built 1/8th Scale Nitro Buggy - Race Ready

Fri, 19 Mar 2010 11:55:17 +0000

]]>

The ACME Warrior is a fully built, fully featured, race ready, top of the range 1/8 scale off-road buggy, and comes with many feature enhancements to make this great looking car not only look the part but 'be' the part! There are two versions available here, the standard and the Pro, both have high quality components, and a powerful .21 nitro engine.

The warrior is built using advanced components and innovative engineering to get the best performance out of your package. It has a newly developed C-hub steering system, where the king pin axis extends to the wheel centre (see picture right) this feature improves steering performance. It has a specially designed suspension system, with twin adjustable rear suspension modes which allows for a flexible driving mode and a smooth driving mode.

Part of its performance is due to the lightweight ultra-compact gear box; this has a low centre of gravity, assisting with grip and control. The gearbox is also built to be highly durable, so that it can cope better with the hard knocks associated with buggy use. It has been engineered with a gear ratio that offers both superb acceleration and a high top speed. Not only this but the gearbox consists of all steel gear and is of a pinion design which makes it easier to maintain and repair.

The Warrior is built around a solid aluminum chassis, which has a width of only 129mm; this centralised chassis design allows quicker steering and faster response.
The blows are cushioned by the 16mm super big bore oil shocks, pictured left.
The Warrior also has fully adjustable sway bar ball cups, and an adjustable high-downforce wing for better traction and stability.

Additionally the front bumper is built so that it moves backwards on impact, this can prevent the chassis from becoming distorted or even broken when landing after jumps.

FEATURES:
New C-hub steering;
Newly developed suspension;
Twin adjustable rear suspension;
Lightweight ultra-compact gear box;
Solid aluminum chassis;
Width of only 129mm;
Quicker steering and fast response;
16mm super big bore oil shocks;
New gear ratio;
Easy maintenance pinion gearbox;
All Steel Gear;
Adjustable Sway bar ball cups (Pro only);
Adjustable high-downforce wing;

SPECIFICATIONS:
Height: 185mm
Length: 505mm
Width: 310mm
Wheel base: 315~320mm
Track F/R: 310mm
Ground clearance: 30mm
Weight: 3300g
Transmitter: 2 channel

A remote start upgrade is available as an option.

Some features are specific to the Pro version and are not found on the standard version:

The standard model uses the normal dogbone, not CVD as in the Pro;
The standard version hasn't been equipped with the Front & Rear Swaybar system;
There are only 2pcs diff.gears which on front, rear & center gear box of standard, while PRO is 4pcs;
The thickness of chassis & shock tower that on standard is 2.5mm & 3mm respectively, while the Pro is 3mm & 4mm;
The standard uses metal bearing.
All the linkages on Pro can be set with adjustable turnbuckle.

]]>

ACME Attacker - Fully Built 1/8th Scale Nitro RC Buggy

Fri, 19 Mar 2010 11:41:23 +0000

]]>

The Attacker is ACME's entry level to the world of 1/8 scale nitro powered model buggies. You'll find it hard to find a fully built 1/8 buggy at this price anywhere, yet we've still spec'd this machine with aluminium shocks and a .18 nitro engine. It features a high downforce rear wing too as an aid to grip at speed. Designed as an off-road buggy, it has fully functional suspension and will run on a variety of terrains.

FEATURES:
1/8 Scale Gas Powered Car;
Fully Assembled;
4wd Shaft Drive System;
W/.18 Easy-To-Start Pull Start Powerful Engine;
Oil-Filled Aluminium Shocks;
Single Speed;
Front And Rear Bevel Differentials;
W/125cc Fuel Tank;
Quicker Steering And Fast Response;
Low Centre Of Gravity Design;

SPECIFICATIONS:
Height: 185mm
Length: 505mm
Width: 310mm
Wheel base: 315~320mm
Track F/R: 310mm
Ground clearance: 30mm
Weight: 3300g
Transmitter: 2 channel

This buggy has everything you need to introduce you to the thrills and spills of 1/8 scale radio controlled cars.

A remote start upgrade is available as an option.

]]>

Bug Crusher PRO - Nitro RC Truck

Wed, 27 Jan 2010 10:51:10 +0000

]]>

The Bug Crusher Pro is the ultimate 1:10 scale monster truck with many hop ups included as standard. If you want a race ready monster truck with all the main upgrades pre-installed then this is the perfect choice. You can't get a 1/10th monster truck with a longer features list or that looks this good. We have taken a standard Bug Crusher and then crammed it with all the best optional parts which if purchased separately would cost a lot more. Also included is a rechargeable battery pack and charger for the electronics which gives more power and speed to the servos than using normal AA batteries.

As well as all the features found on the standard Bug Crusher this pro version includes the following:

Polished Aluminium Tuned Exhaust Pipe
Steel Universals Drive Shafts
Aluminium Upper Chassis
Aluminium Front Suspension Upper Arms
Aluminium Front Suspension Lower Arms
Aluminium Front Upper Arm Mount
Aluminium Rear Suspension Upper Arms
Aluminium Rear Suspension Lower Arms
Aluminium Pro Shock Absorbers
Aluminium Exhaust Pipe
Aluminium Wheel Hexes
Aluminium 4mm Flanged Lock Nut
Rechargeable battery pack and charger for the electronics

Comes with a high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Nitro engines usually have two or more tuning needles but these only have a single adjustment that makes them much easier to use without sacrificing any power.

We have had this version of Monster truck kited out with traditional stick type controllers whereas the Acme range come with the new wheel type controllers.

Specifications:
Length: 400mm
Height: 185mm
Width: 310mm
Wheelbase: 275mm
Gear Ratio 1 Speed: 13.34:1
Ground Clearance: 30mm
Tyres: 60mm width 120mm diameter
Radio: Stick type
Engine: Infinity .18

Required to use:
Fuel, glow start (both optional below) and 8 normal aa batteries.

Features:
All the top features of the standard Bug Crusher plus loads of hop ups pre-installed as listed above!
High performance Infinity 18 Engine
Traditional stick controller
Battery pack for electrics

]]>

Bug Crusher - Nitro RC Monster Trucks

Wed, 27 Jan 2010 10:37:36 +0000

]]>

This is the great looking and even better performing monster truck. Many of the specs are the same as our other nitro monster truck - the Conquistador - such as the high power gear ratio, aluminium shocks, large size 18 engine and high ground clearance. There are however a few differences.

The most obvious difference is the visual finish. Finished in a unique and funky paint job. Matched with the dual aluminium shocks and over sized wheels with flashy rims we believe this could be the best looking nitro monster truck on the market.

This version of monster truck has been upgraded with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and one of the most reliable engines on the market. Usually these models come with engines made in Taiwan or China that you will see being offered by other model shops selling these but from our experience we have found the extra few pounds for a Japanese engine is well worth it for the difference in quality and performance.

We have had this version of Monster truck kited out with traditional stick type controllers whereas the Acme range come with the new wheel type controllers.

Required to use:
Fuel, glow start (both optional below) and 12 normal aa batteries.

Features:
Pivot Ball suspension
Innovative spring loaded bumper
8 Oil-filled aluminium shocks
2.5mm thick anodised aluminium chassis
Composite Tuned Pipe
Pre-painted body with decals applied
Super-efficient 4WD shaft-drive
75cc fuel tank with splash guard
Hollow light weight flywheel
Slipper clutch system to protect spur gear
High impact & high traction electroplated wheels
Fiber disc brake for extra stopping power
Front and rear hardened metal drive gears
Sealed radio box protects the electronics
Adjustable steel turnbuckles
High performance Infinity 18 Engine
Traditional stick controller

]]>

HSP Backwash PRO - 1/10th Scale Nitro Buggy

Wed, 27 Jan 2010 10:24:44 +0000

]]>

The Backwash Pro is the ultimate nitro radio controlled car with many hop ups included as standard. If you want a race ready model with all the main upgrades pre-installed then this is the perfect choice. You can't get a 1/10th buggy with a longer features list or that looks this good. We have taken a standard Backwash and then crammed it with all the best optional parts which if purchased separately would cost a lot more. Also included is a rechargeable battery pack and charger for the electronics which gives more power and speed to the servos than using normal AA batteries.

As well as all the features found on the standard Backwash nitro radio controlled car, this pro version includes the following:

Polished Aluminium Tuned Exhaust Pipe
Steel Universals Drive Shafts
Aluminium Upper Chassis
Aluminium Front Suspension Upper Arms
Aluminium Front Suspension Lower Arms
Aluminium Front Servo Link
Aluminium Rear Servo Link
Aluminium Rear Suspension Lower Arms
Aluminium Pro Shock Absorbers
Aluminium Exhaust Pipe
Aluminium Wheel Hexes
Aluminium 4mm Flanged Lock Nut
Rechargeable battery pack and charger for the electronics

Comes with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Nitro engines usually have two or more tuning needles but these only have a single adjustment that makes them much easier to use without sacrificing any power.

We have had this version of the Backwash kited out with traditional stick type controllers whereas the Acme range come with the new wheel type controllers.

Specifications:
Length: 400mm
Height: 160mm
Width: 250mm
Wheelbase: 275mm
Gear Ratio 2 Speed: 5.84:1(H) 8.58:1(L)
Ground Clearance: 26mm
Front Tyres: 32mm width 86mm diameter
Rear Tyres: 40mm width 86mm diameter
Radio: Stick type
Engine: Infinity .18

Required to use:
Fuel, glow start (both optional below) and 8 normal aa batteries.

Features:
All the top features of the standard Backwash nitro radio controlled car, plus loads of hop ups pre-installed as listed above!
High performance Infinity 18 Engine
Traditional stick controller
Battery pack for electrics

]]>

HSP Backwash - 1/10th Scale Nitro RC Buggy

Wed, 27 Jan 2010 10:13:13 +0000

]]>

This is the great looking and even better performing HSP nitro radio controlled buggy. The buggy is extra tough and a good all rounder performing well both on road and off. The Backwash is feature packed making it one of the top spec buggies on the market and the .18 engine along with the automatic 2 speed gearbox makes it extremely quick. Please note there are two other cheaper versions of the HSP nitro buggy but this is the top of the range one that has the two speed gearbox and also the pivot ball suspension. These also have upgrades on them such as the chrome finished wheels, Infinity engine and stick type transmitter. The Backwash comes fully built with everything included apart from fuel, glow start (both optional below) and 12 normal AA batteries.

This version of nitro radio controlled buggy has been upgraded with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and one of the most reliable engines on the market. Usually these models come with engines made in Taiwan or China that you will see being offered by other model shops selling these but from our experience we have found the extra few pounds for a Japanese engine is well worth it for the difference in quality and performance.

We have had this version of the Backwash kited out with traditional stick type controllers whereas the standard versions come with the wheel type controllers.

Required to use:
Fuel, glow start (both optional below) and 12 normal aa batteries.

Features:
Pivot Ball suspension
Assembled Oil-filled aluminium shocks
2.5mm thick anodised aluminium chassis
Composite Tuned Pipe
Pre-painted body with decals applied
Super-efficient 4WD shaft-drive
75 cc fuel tank with splash guard
2 speed automatic gearbox
Hollow light weight flywheel
Slipper clutch system to protect spur gear
High impact & high traction electroplated wheels
Fiber disc brake for extra stopping power
Front and rear hardened metal drive gears
Sealed radio box protects the electronics
Adjustable steel turnbuckles
High performance Infinity 18 Engine
Traditional stick controller

]]>

Conquistador Special Edition Nitro RC Trucks

Wed, 27 Jan 2010 09:35:07 +0000

]]>

The Conquistador Special Edition is the top of the range Acme model with many hop ups installed as standard. With all the aluminium upgrades and performance enhancing parts the Conquistador becomes a stronger and better performing model. We have taken a standard Conquistador and then crammed it with all the best optional parts that if purchased separately would cost a lot more. Top that of with the visual enhancements of the blue machined aluminium parts and polished aluminium exhaust and you have got one awesome looking and performing monster truck.

This off road version features big spiked over sized tyres and new monster truck shell.

As well as all the features found on the standard Conquistador nitro trucks this SE version includes the following:

1. Aluminium upper wishbones
2. Aluminium lower wishbones
3. Aluminium servo saver
4. Aluminium knuckle arms
5. Polish aluminium pipe
6. Hardened steel engine clutch gear
7. Hardened spur gear
8 . Aluminium shock towers

Like the standard Conquistador nitro trucks this special edition still comes fully built with UK radio equipment pre-installed. All that is required is fuel, glow start (both optional below) and 12 normal AA batteries.

Acme Tech nitro trucks now come with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Engines in nitro trucks usually have two or more tuning needles but these only have a single adjustment that makes them much easier to use without sacrificing any power.

SPECIFICATIONS:
Width: 330MM
Height: 165MM
Track: 267MM
Length: 390MM
Wheel base: 280MM
Gear ratio: 10.44:1
Engine: Team Infinity 18
Wheel dia.: 108*56MM
Ground clearance (F/R): 38MM/46MM

FEATURES:
Fully Upgraded Special Edition!
1/10 Scale nitro powered car
4WD Shaft drive system
Infinity 18 size pull start engine
Oil-filled Alluminium shocks
Single speed gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.

]]>

Conquistador Nitro RC Monster Trucks

Wed, 27 Jan 2010 09:05:24 +0000

]]>

For the serious off roader the Conquistador nitro monster truck makes short work of even the toughest terrains. If you are looking to race through mud, grass and even sand then this is the model for you. With its long extra tough alloy shocks, bigger engine and stronger chassis the model has been carefully designed to tackle any off road challenge. It features a sealed radio and battery compartment to keep the dirt out and big chunky wheels for extra grip and ground clearance. The shaft driven 4WD system ensures that you wont be getting left stuck in the mud! The model comes fully built with radio control included. Just add fuel and a glow start and prepare for some serious off road fun.

Acme Tech models now come with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Nitro engines usually have two or more tuning needles but these only have a single adjustment that makes them much easier to use without sacrificing any power.

SPECIFICATIONS:
Width: 330MM
Height: 165MM
Track: 267MM
Length: 390MM
Wheel base: 280MM
Gear ratio: 10.44:1
Engine: Team Infinity 18
Wheel dia.: 108*56MM
Ground clearance (F/R): 38MM/46MM

FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Infinity 18 size pull start engine
Oil-filled Alluminium shocks
Single speed gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.

]]>

Cyclone PRO Nitro Cars

Wed, 27 Jan 2010 08:57:21 +0000

]]>

Our quickest model, the Cyclone PRO is for the serious racer. With exceptional quality, engineering and design it offers the highest performance and responsive handling. The Cyclone PRO has been upgraded with a two speed automatic gearbox and tough aluminium shock absorbers. It also comes fully loaded with racing ball bearings throughout instead of the standard metal bearings found in most models. Ball bearings give a quicker and smoother ride and most other manufacturers charge at least £30 for this upgrade. Of course the model also boasts the high build quality of all Acme models with a strong alloy chassis, shaft driven 4WD system and sealed radio compartments. The Cyclone PRO comes fully built with radio control included - just add fuel and a glow start.

Acme Tech models now come with high quality .18 Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market.

SPECIFICATIONS:
Width: 199MM
Height: 115MM
Track: 185MM
Length: 380MM
Wheelbase: 259MM
Gear ratio: 5.69:1 (High), 7.83:1 (Low)
Engine: New Team Infinity 18
Wheel dia.: 64*26MM
Ground clearance: 8.5MM

FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Fully ball raced system
Infinity .18 pull start engine
Aluminium adjustable oil-filled shocks
Two speed automatic gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.

]]>

Cyclone RC Cars

Tue, 26 Jan 2010 23:43:53 +0000

]]>

The Cyclone nitro car is our entry level model for the on road racer. Perfect for the beginner it features a simple gearbox and easy layout which will allow you to be racing in no time. Although more simple than the PRO version the Cyclone is still a seriously fast nitro racing car with an excellent performance profile. With its strong alloy chassis, shaft driven 4WD system and sealed radio compartments you will be amazed at the speed, handling and quality of such a low priced model. The Cyclone nitro cars come fully built with radio control included. Just add fuel and a glow start and prepare to enter the world of nitro radio controlled racing.

Acme Tech nitro cars now come with high quality .18 Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market.

Looking for a higher spec model? Then check out our Cyclone PRO!

SPECIFICATIONS:
Width: 199MM
Height: 115MM
Track: 185MM
Length: 380MM
Wheelbase: 259MM
Gear ratio: 8.35:1
Engine: New Powerful Team Infinty 18
Wheel dia.: 64*26MM
Ground clearance: 8.5MM

FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Japanese high quality pull start engine
Oil-filled shocks
Single speed gear box
Powerful .18 engine
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.

]]>

Condor Pro Special Edition Nitro Buggy

Tue, 26 Jan 2010 23:36:20 +0000

]]>

The Condor Pro Special Edition is the top of the range Acme model with many hop ups installed as standard. With all the aluminium upgrades and performance enhancing parts the Condor Pro becomes a stronger and better performing model. We have taken a standard Condor Pro and then crammed it with all the best optional parts that if purchased separately would cost a lot more. Top that of with the visual enhancements of the blue machined aluminium parts and polished aluminium exhaust and you have got one awesome looking and performing buggy.

As well as all the features found on the standard Condor Pro this SE version includes the following:

1. Aluminium upper wishbones
2. Aluminium lower wishbones
3. Aluminium servo saver
4. Aluminium knuckle arms
5. Polish aluminium pipe
6. Hardened steel engine clutch gear
7. Hardened spur gear

Like the standard Condor Pro this special edition still comes fully built with UK radio equipment pre-installed. All that is required is fuel, glow start (both optional below) and 12 normal aa batteries.

SPECIFICATIONS:
Width: 267MM
Height: 155MM
Track: 240MM
Length: 430MM
Wheelbase: 280MM
Gear ratio: 5.69:1 (High), 7.83:1 (Low)
Engine: Team Infinity 18
Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
Ground clearance: 27MM

FEATURES:
Fully Upgraded Special Edition!
1/10 Scale nitro powered car
4WD Shaft drive system
Fully ball raced system
Infinity 18 size pull start engine
Aluminium oil-filled shocks
Two speed automatic gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
Anti-roll bars pre-fitted
High quality 27MHZ CE approved Radio system with changeable crystals.

]]>

Condor PRO Nitro Buggy

Tue, 26 Jan 2010 23:25:34 +0000

]]>

The Condor PRO is our favourite model. With high speed performance and off road capabilities you get the best of both worlds. The Condor PRO is the next generation of the standard Condor, upgraded with a two speed automatic gearbox, bigger engine and tough aluminium shock absorbers. It also comes fully loaded with racing ball bearings througout instead of the standard metal bearings found in most models. Of course the model also boasts the high build quality of all Acme models with a strong alloy chassis, shaft driven 4WD system and sealed radio compartments. These nitro radio controlled cars come fully built with radio control included. Just add fuel and a glow start (optional) and prepare for some serious off road fun.

Acme Tech nitro radio controlled cars now come with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Engines in nitro radio controlled cars usually have two or more tuning needles but these only have a single adjustment that makes them much easier to use without sacrificing any power.

FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Fully ball raced system
Infinity 18 size pull start engine
Aluminium oil-filled shocks
Two speed automatic gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
Anti-roll bars pre-fitted
High quality 27MHZ CE approved Radio system with changeable crystals.

]]>

Condor Nitro rc Buggy

Tue, 26 Jan 2010 15:36:44 +0000

]]>

The Condor nitro radio controlled car is our entry level model and is the easiest way to get into the exciting hobby of model racing. Perfect for the beginner it features a simple gearbox, easy tune engine and easy layout which will allow you to be racing in no time.

Beginners soon become novices so the Condor has still been designed with performance in mind. With its strong alloy chassis, shaft driven 4WD system and sealed radio compartments it will tackle off road tracks as well as any other model. The Condor comes fully built with radio control included. Just add fuel and a glow start (optional) and prepare for some serious off road fun.

Each Acme Tech nitro radio controlled car now comes with a high quality .18 Team Infinity engine. Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market.

SPECIFICATIONS:
Width: 267MM
Height: 155MM
Track: 240MM
Length: 430MM
Wheelbase: 280MM
Gear ratio: 8.35:1
Engine: Team Infinity .18
Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
Ground clearance: 27MM

FEATURES:
1/10 Scale nitro radio controlled car
4WD Shaft drive system
Infinity powerful .18 pull start engine
Oil-filled shocks
Single speed gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.

]]>

NB16-T Nitro Truggy

Tue, 26 Jan 2010 15:32:43 +0000

]]>

The NB16-T is a mini nitro car with a big powerful punch. Small enough for back yard racing but powerful enough to outrun a lot of full scale models! All the features and more that you would expect from a full size nitro car have been squeezed into this little monster truck. The result is a serious bit of kit for major back garden fun.

Mini nitro models have been very popular since Acme released the world's first mini nitro car in 2006 because unlike the original sized models you do not need a field or track to race them on. If you want a model that you can race both seriously at tracks but also have some fun with at home then this is the model to go for.

The NB16-T nitro car comes fully built with transmitter included. All that you need to be up and running is fuel, a glow start (both available below as options), 4 AAA batteries for the receiver and 8 AA batteries for the transmitter (these are standard sized batteries available from supermarkets etc.)

SPECIFICATIONS:
Width: 208MM
Height: 108MM
Track: 208MM
Length: 297MM
Wheel base: 191MM
Gear ratio: 11.2:1
Engine: Toki 06 Size
Wheel dia.: 73x39.5MM
Ground clearance (F/R): 19MM
Chassis: 2mm-thick hard anodized alum.
Drive: Four wheel shaft drive
Fuel Tank: 38cc
Ball Bearings: Full set
Shocks: Four oil filled shocks
Shock towers: Anodized aluminum
Clutch Bell: Steel
Differentials: Bevel gear type
Brakes: Metal disc brake
Clutch shoes: 2 shoe race spec
Exhaust: Alloy manifold and tuned plastic pipe
Caster: Adjustable
Camber: Adjustable
Body: Pre-painted
Build : Fully built

FEATURES:
*1/16 Scale mini nitro powered truggy
*High quality Toki engine
*Thick aluminium shock mounts
*Solid steel drive cups
*2 piece racing clutch
*Disc brake system gives ultimate stopping power
*Sealed radio box protects electronics
*27MHZ CE approved Radio system with changeable frequency crystals
*C-hub front and rear suspension
*Front & rear differentials
*Fully ball raced
*Metal manifold
*High torque mini servos
*Fully assembled
*Alum. upgrades available
*Front and rear anti roll bars fitted as standard

]]>

NB16 Nitro Buggy

Tue, 26 Jan 2010 15:16:25 +0000

]]>

The all new Acme mini nitro cars - Half the size but twice the fun! All the features of a full sized model packed into a super mini, super cute little monster! These nitro cars are so much fun whizzing round your garden or take them down to your local club to wow the crowd with something they have never seen before.

No radio controlled car collection is complete without one of these. The NB16 nitro cars come fully built with all radio equipment included. If you want a model that you can race both seriously at tracks but also have some fun with at home then this is the model to go for.

The NB16 comes fully built with transmitter included. All that you need to be up and running is fuel, a glow start (both available below as options), 4 AAA batteries for the receiver and 8 AA batteries for the transmitter (these are standard sized batteries available from supermarkets etc.)

SPECIFICATIONS:
Width: 187MM
Height: 108MM
Track: 126MM
Length: 232MM
Wheelbase: 177MM
Gear ratio: 11:1
Engine: New Powerful Toki 05 nitro engine
Wheel dia.: 70mm
Ground clearance: 18MM

FEATURES:
Fully assembled
Oil filled shocks
Front & rear sway bar system
4WD shaft driven system
Aluminium oil-filled shocks
Bevel gear differentials
Powerful .05 engine
High torque mini servos
AAA battery case for receiver
38cc fuel tank
14pcs ball bearings
Hop-ups in alum coming soon
27MHZ CE approved Radio system with changeable crystals.

]]>